Accessories · Beginner-friendly · 1.5–2 hours

♥A fitted crochet phone case with soft coquette bow detail.♥

Coquette Bow Crochet Phone Case Pattern for iPhone

A fitted coquette-style crochet phone-case cover attached to a thin clear plastic snap-on iPhone shell, with a blush cotton back, delicate bow appliqué, exposed screen, and a camera opening sized to your own case.

Pattern and instructions by CrochetIndex Editorial

Save to Pinterest

Project overview

What you'll make

Make a coquette bow crochet phone case for iPhone on a thin plastic snap-on shell, with a blush cover, low-profile bow, and camera opening sized to your case.

iPhone fit note

This is a size-to-shell pattern, not a model-specific iPhone pattern. Use a thin plastic snap-on shell made for your exact phone. The same method can be adapted for different iPhone sizes, including iPhone 17 and iPhone 18, by changing the starting chain, row count, edge shaping, and camera opening to match that shell.

Difficulty

Beginner-friendly

Time

1.5–2 hours

Includes

Project photos and pattern

Construction overview

This project makes a real coquette bow crochet phone case by fitting a crochet back-and-edge cover to a thin clear plastic snap-on iPhone shell. The shell provides the exact phone fit while the crochet layer adds the blush texture and low-profile bow.

Available case designs

More crochet phone case styles

Browse the other phone case designs in this crochet shell-cover series. Only the currently available case pages are shown with finished assets.

Beginner-friendly · 1.5–2 hours

Cherry Heart Crochet Phone Case for iPhone

A fitted crochet phone-case cover attached to a thin clear plastic snap-on iPhone shell, with a charcoal cotton back, cherry-red heart appliqué, exposed screen, and a camera opening sized to your own case.

Open project

Beginner-friendly · 1.5–2 hours

Daisy Bloom Crochet Phone Case for iPhone

A fitted daisy crochet phone-case cover built on a thin clear plastic snap-on iPhone shell, with a soft lavender or sage back, a small daisy motif, exposed screen, and a camera opening sized to your own case.

Open project

Beginner-friendly · 1.5–2 hours

Checkerboard Crochet Phone Case for iPhone

A fitted checkerboard crochet phone-case cover attached to a thin clear plastic snap-on iPhone shell, with crisp cream-and-charcoal blocks, an exposed screen, and a camera opening sized to your own case.

Open project

Beginner-friendly · 1.5–2 hours

Coquette Bow Crochet Phone Case for iPhone

Open project

Materials & tools

What you'll need

Thin clear plastic snap-on shell made for your exact iPhone model
Worsted-weight cotton yarn in soft blush pink or warm cream
Accent yarn in a slightly deeper rose-pink bow and optional pearl-like cream edging
4.0 mm crochet hook
Yarn needle
Fabric-safe craft glue or matching sewing thread for attaching the crochet cover to the shell
Scissors
Stitch markers (optional)

Coquette Bow Crochet Phone Case for iPhone materials and plastic shell

Written pattern

Follow the pattern from start to finish

Read the abbreviations first, check the notes, then work through the pattern in order.

Abbreviations

CH = chainSC = single crochet

Foundation: With blush or cream yarn, ch until the chain matches the width of the plastic snap-on shell back; use the exact shell width as your measurement.

Row 1: sc across, ch 1, turn.

Rows 2 onward: continue sc until the panel matches the shell height, checking the fit against the shell.

Camera opening: mark the camera area and work partial rows or skipped stitches so the cutout stays open and precise.

Bow appliqué: crochet a small rectangle for the bow loops, cinch the center with a few wraps of deeper rose yarn, and add short tails if desired.

Sew the bow appliqué to the crochet base cover.

Work an edge round if needed to tidy the outer edge and camera opening.

Attach the crochet panel to the thin clear shell using hand stitching or fabric-safe adhesive only on the shell back.

Optional finish: add a narrow pearl-like cream edging if it does not make the case bulky.

Final check: the shell must still fit the phone and all cutouts must stay usable.

Pattern notes

This is a fitted crochet cover attached to a thin plastic snap-on shell, not a slip sleeve or pouch.

There is no fixed phone-size stitch count: measure against the shell for your exact iPhone model and adjust the foundation, rows, and camera opening as needed.

Test the shell on the phone before permanent attachment so the camera, buttons, ports, and screen remain fully usable.

Skills used

Chain stitch Single crochet Slip stitch Weave in ends

Detailed steps

Crochet the fitted cover, make the bow, then attach everything to the shell.

Build a fitted crochet back cover to match your plastic snap-on iPhone shell, shape the camera opening from that shell, make the bow appliqué, then attach the crochet layer while keeping the screen, buttons, ports, and lenses usable.

Tap any step below to check it off and save your progress!

Measure the shell and chain

Use the plastic snap-on shell for your exact iPhone model, or a paper tracing of its back, as the template. Chain only until the foundation matches that shell width.

Pattern lines

Row 1: sc across, ch 1, turn.

Foundation: With blush or cream yarn, ch until the chain matches the width of the plastic snap-on shell back; use the exact shell width as your measurement.

Rows 2 onward: continue sc until the panel matches the shell height, checking the fit against the shell.

Camera opening: mark the camera area and work partial rows or skipped stitches so the cutout stays open and precise.

Bow appliqué: crochet a small rectangle for the bow loops, cinch the center with a few wraps of deeper rose yarn, and add short tails if desired.

Sew the bow appliqué to the crochet base cover.

Work an edge round if needed to tidy the outer edge and camera opening.

Attach the crochet panel to the thin clear shell using hand stitching or fabric-safe adhesive only on the shell back.

Optional finish: add a narrow pearl-like cream edging if it does not make the case bulky.

Final check: the shell must still fit the phone and all cutouts must stay usable.

Crochet the base cover panel

Work even rows of single crochet until the base panel matches the shell height and the stitch texture looks smooth.

Shape the camera cutout

Mark the camera corner and shape a clean opening so the lenses remain unobstructed after attachment.

Test the cover on the shell

Lay the crochet panel over the clear shell and verify the fit, edge alignment, and camera opening placement.

Crochet the bow appliqué

Make a slim crochet bow appliqué with neat loops and a tidy center wrap, sized to sit cleanly on the cover back.

Attach the design to the cover

Sew the bow neatly to the center of the back cover and keep the tails or ends balanced.

Attach the crochet cover to the shell

Secure the finished crochet cover to the clear shell back while keeping the screen fully exposed and the camera cutout aligned.

Finish and test the phone case

Snap the shell onto the phone and confirm that the case fits well and that the screen, buttons, ports, and camera stay usable.

Tips

Small details that make the finish better

Size from the plastic shell, not from a model name: use the exact shell for your phone and adjust the foundation, panel height, and camera opening until the crochet layer matches it.
Choose cotton yarn for a sharper motif and a flatter finished cover.
Block or steam small motifs lightly before sewing them onto the cover if they curl.
A clear or translucent shell base helps the finished project read as a real phone case rather than a soft sleeve.

Fit notes

Use the exact plastic snap-on shell for your phone as the sizing template; do not copy the pictured dimensions or camera opening by eye.
Keep the screen, side buttons, speaker area, charging opening, and camera lenses accessible before attaching the crochet layer permanently.
Check the camera opening against the real shell after every shaping change; standard, Pro, and Pro Max models can place and size the camera area differently.
If you use adhesive, apply it sparingly to the shell back only so the crochet fabric stays flat and the phone remains easy to remove from the case.

Variations

Ways to adapt the project

Change the yarn color, finishing touches, or small embellishments while keeping the same core construction.

Quick answers

Common questions before you start

Will this crochet phone case pattern fit different iPhone models?

Yes, because the pattern is sized from the plastic snap-on shell rather than from one fixed phone measurement. Use a shell made for your exact iPhone and adjust the starting chain, panel height, and camera opening to match it.

Can I adapt this pattern for iPhone 17 or iPhone 18?

Yes. Use a thin plastic snap-on shell made specifically for your iPhone 17 or iPhone 18 model, then size the crochet panel directly to that shell. Do not copy the pictured camera opening or stitch count without checking your own case.

Why does this crochet phone case use a plastic shell?

The plastic shell provides the exact phone fit and keeps the screen, buttons, charging port, speakers, and camera positioned correctly. The crochet layer is decorative and is attached to the outside of that shell.

How do I size the camera opening?

Place the crochet panel against your actual shell, mark the camera area, and shape the opening from those marks. Recheck the opening before permanent attachment because camera layouts vary between iPhone models.

Is this a crochet phone sleeve or a fitted case?

It is a fitted phone case built on a snap-on plastic shell. The phone screen stays exposed and the device snaps into the shell normally; the crochet fabric does not form a top-loading pouch.